Shields

Subteam: ChassisSubsystem: ErgonomicsAssembly: ShieldsCars: CR21

Purpose

Prevent driver contact with the steering rack and other mechanical components in a crash.

Function

Shielding panels between the driver and rotating or hard components, made from CFRP or aluminium. A rules requirement and part of the no-snag-point assessment. Design Philosophies and Processes: Inherited from the Ergonomics subsystem design process: 1. Take driver body measurements and place them against the ergonomics study ranges. 2. Mold the seat insert to the driver in the car with expanding foam, then hand post-process and cover. 3. Set headrest and harness mounting to the rules and to the driver's shoulder height. 4. Run a simulator or on-track endurance stint and measure fatigue with EMG. 5. Iterate the insert shape at the identified pressure and support points.

Reoccuring issues

None recorded. This part has no entry in Knowledge_Transfer/Issue Logging/Fault Vault.xlsx, in either Issue Log.xlsx, in CR22/Issue Tracking/Shakedown 7-15-23.xlsx, or in any design review issue list found in CrimsonStorage or Box.

Still to document

Nothing in CrimsonStorage covers these yet.

Design Process — How it is designed and deemed effective at its purpose and function
Design Constraints — What held back the design whether it be location, time, materials etc
Analysis — How you get quantitative, predictive information on the part
Manufacturing Process — How it is assembled in detail from start to finish
Full Material List — Everything used to build this part (Best if actual numbers are used to show how it evolves year to year)
Improvements — Improvements for this generation
Properties — Size, weight, mass, charge, thermal properties, anything else relevant